Understanding sign regulations in Briny Breezes, FL
Every outdoor sign in Briny Breezes is governed by the municipality’s sign ordinance, which sets how large a sign may be, how tall it may stand, how far it must sit from the property line, whether it may be illuminated, and which sign types are permitted in each zoning district. This page summarizes those requirements in plain language and links each value back to the section of the Briny Breezes code it came from.
Sign rules here are layered. The base zoning district — commercial, industrial, or residential — sets the default limits, and overlay districts such as historic or downtown districts can tighten them further. Because the most specific jurisdiction controls, a freestanding monument sign on a commercial parcel and a wall sign in a historic overlay can face very different limits even on the same street in Briny Breezes.
Use the figures below as a fast first check, then run a full address lookup to confirm the exact limits for a specific parcel in Briny Breezes, Florida. The full report also covers permit requirements, prohibited sign types, and illumination rules — each cited to the source ordinance so your permit application can reference it directly.
Before you order or install a sign in Briny Breezes, confirm three things: the maximum sign area and height allowed in the parcel’s zoning district, the minimum setback from the right-of-way, and whether the sign type you want — freestanding, monument, wall, projecting, or awning — is permitted there at all. Many permit denials come from missing a setback or an overlay-district restriction rather than from the size of the sign itself, so checking the governing section before applying saves a costly resubmittal.
Advertisement
Advertisement
Ground sign setback
30 feet from intersecting right-of-way
Construction
Freestanding Sign Engineer Certification
All permanent freestanding signs in excess of 24 square feet shall be designed, signed, and certified by a registered state engineer.
Dimensions
Public Facility Id Sign Max Area
Identification signs for public and semi-public facilities (type P-2) have a maximum area of 32 square feet for one sign, with a maximum of 2 signs per use.
Point Of Purchase Sign Max Area
The maximum permitted area for each P-7 sign shall be 10% of the square footage of the building face fronting on the primary street, and 5% of the square footage facing a secondary or side street.
If the permittee or owner fails to remove the sign or cure the violation within 30 days after notice, the sign may be removed or altered to comply by the town at the owner's expense.
Ground Signs
Ground Sign Setback
30 feet from intersecting right-of-way
Maintenance
Permanent Sign Maintenance
All permanent signs shall be kept free of rust, broken parts, mildew, damage, peeling or faded paint, or any other deficiency to ensure a like new appearance at all times.
Advertisement
Advertisement
Permit
Permit Required General
It shall be unlawful to post, display, change, or erect a sign or sign structure that requires a permit without first having obtained a permit. All signs not expressly permitted are strictly prohibited.
Temporary Sign No Permit
A permit is not required for placement of a temporary sign.
Placement
Sign Intersection Setback
Any freestanding or projecting sign located along the right-of-way within 30 feet from an intersecting right-of-way is prohibited, except directional signs less than three feet in height.
Prohibited Signs
Prohibited Sign Types
Flashing, moving or fluttering signs, feather banners, signs producing glare, and snipe signs shall be prohibited throughout the town.
Temporary Signs
Temporary Sign Storm Removal
All temporary signs shall be removed and safely stored within a structure upon the declaration of a tropical storm or hurricane watch or warning that includes the Town of Briny Breezes.
Portable Sign Commercial Only
Portable signs (A-frame, sandwich or double-faced) shall not be placed or located except on commercially zoned (C-1) private property.