F
FreeCodeChecks

Sign Code Summary

Fort Myers Beach, FL

Local sign ordinance requirements — free, cited to the source section.

Last updated

Run a full lookup for an address in Fort Myers Beach →

Understanding sign regulations in Fort Myers Beach, FL

Every outdoor sign in Fort Myers Beach is governed by the municipality’s sign ordinance, which sets how large a sign may be, how tall it may stand, how far it must sit from the property line, whether it may be illuminated, and which sign types are permitted in each zoning district. This page summarizes those requirements in plain language and links each value back to the section of the Fort Myers Beach code it came from.

Sign rules here are layered. The base zoning district — commercial, industrial, or residential — sets the default limits, and overlay districts such as historic or downtown districts can tighten them further. Because the most specific jurisdiction controls, a freestanding monument sign on a commercial parcel and a wall sign in a historic overlay can face very different limits even on the same street in Fort Myers Beach.

Use the figures below as a fast first check, then run a full address lookup to confirm the exact limits for a specific parcel in Fort Myers Beach, Florida. The full report also covers permit requirements, prohibited sign types, and illumination rules — each cited to the source ordinance so your permit application can reference it directly.

Before you order or install a sign in Fort Myers Beach, confirm three things: the maximum sign area and height allowed in the parcel’s zoning district, the minimum setback from the right-of-way, and whether the sign type you want — freestanding, monument, wall, projecting, or awning — is permitted there at all. Many permit denials come from missing a setback or an overlay-district restriction rather than from the size of the sign itself, so checking the governing section before applying saves a costly resubmittal.

Advertisement
Max ground sign height
Monument: Not specified; Pylon: Not specified
Ground sign setback
Monument: Not specified; Pylon: 2 ft from edge of pavement

Building Signs

Building Sign Formula
Area of double-face or sandwich board signs calculated based on one sign face
Building Sign Illumination
If permitted, sign face must be designed so that illumination occurs only on individual letters or symbols with an opaque background panel

Definitions

Portable Signs Definition
Any portable sign, not to exceed six square feet.
Projecting Sign Definition
A sign which is attached to a building and projects more than 18 inches above, below, or outward from, and is supported by, a wall, parapet, or ceiling of a building.
Residential Sign Definition
in full report
Roof Sign Definition
in full report
Sandwich Board Sign Definition
in full report
Snipe Sign Definition
in full report
Temporary Sign Definition
in full report
Wall Sign Definition
in full report
Animated Sign Definition
in full report
Awning Sign Definition
in full report
Bench Sign Definition
in full report
Canopy Sign Definition
in full report
Development Identification Sign Definition
in full report
Directional Sign Definition
in full report
Emitting Sign Definition
in full report
Government Sign Definition
in full report
Illuminated Sign Definition
in full report
Monument Sign Definition
in full report
Parasite Sign Definition
in full report
Pole Sign Definition
in full report
Portable Sign Definition
in full report
Window Sign Definition
in full report
Sign Face Definition
in full report
Back Lit Awning Definition
in full report
Back Lit Awnings Definition
in full report
Balloon Sign Definition
in full report
Banner Definition
in full report
Display Box Definition
in full report
Double Faced Sign Definition
in full report
Flag Definition
in full report
Nonconforming Sign Permits Definition
in full report
Permit Board Definition
in full report

30 more definitions rules in the full report →

Directional Signs

Directional Max Size
4 square feet

Electrical Structural

Construction Standards Requirement
Construction standards: In addition to complying with the requirements of this chapter, all signs must meet the structural and other standards regarding sign construction, erection, electrical wiring, etc.

General Info

Jurisdiction Name
Fort Myers Beach, FL

General Standards

Exempt Signs
This chapter shall not apply to any sign erected by the federal, state, county, or Town of Fort Myers Beach government or to the placement of temporary signs not exceeding eight square feet in area within a right-of-way for purposes of business identification or access location, when necessitated by road construction and when authorized by the county or town
Noncommercial Sign Permit Requirements
Noncommercial signs are subject to the same permit requirements, restrictions on size and type, and other conditions and specifications as apply to the sign for which they are being substituted
Noncommercial Sign Substitution
in full report
Sign Area Calculation
in full report
Nonconforming Sign Compliance Requirement
in full report
Posted Property Sign Rule
in full report

4 more general standards rules in the full report →

Ground Signs

Ground Sign Type
Monument and pylon/pole
Ground Sign Formula
Monument: 4 sq ft max area; Pylon: Not specified
Ground Sign Max Height
in full report
Ground Sign Setback
in full report
Freestanding Sign Max Height
in full report
Residential Sign Max Area
in full report
Sign Height Measurement
in full report
Permanent Sign Allowance
in full report

6 more ground signs rules in the full report →

Advertisement

Illumination

Internal Lighting Requirement
Buildings that are required to meet the commercial design standards in § 34-991-1010, shall not install internally lit box signs (see Figure 30-1).

Permit Process

Permit Expiration Date
Sign permit expires six months from issuance; may be extended for good cause
Nonconforming Sign Permits
Permits not issued for alteration, replacement, or repair of nonconforming signs unless modifications bring them into compliance
Electrical Permit Permit Requirement
in full report
Required Application And Inspection Of Sign Permit Requirement
in full report

2 more permit process rules in the full report →

Prohibited Signs

Maximum Angle For Double Faced Sign Prohibition
Double-faced signs with opposing faces having an interior angle greater than 30 degrees shall not be permitted.

Temporary Signs

Temp Signs Allowed
Yes, temporary signs allowed with permit
Temp Sign Rules
Max area: 8 sq ft; Permit required

Window Signs

Window Displays Maximum Area
Window displays: Changes in the content of window displays or window signage, provided all such displays are within the building and any signage does not exceed 25 percent of the window.
Window Sign Allowable Area
30 percent of window area

Zoning

One Sandwich Board Sign Allowance
One sandwich board sign: One sandwich board sign, not exceeding 36 inches in height and 24 inches in width, may be located in front of each tenant space.

Need the full sign-code report?

The full interactive report includes all sign types, illumination rules, permit requirements, and source citations — for free.

See full report →