Every outdoor sign in Indiantown is governed by the municipality’s sign ordinance, which sets how large a sign may be, how tall it may stand, how far it must sit from the property line, whether it may be illuminated, and which sign types are permitted in each zoning district. This page summarizes those requirements in plain language and links each value back to the section of the Indiantown code it came from.
Sign rules here are layered. The base zoning district — commercial, industrial, or residential — sets the default limits, and overlay districts such as historic or downtown districts can tighten them further. Because the most specific jurisdiction controls, a freestanding monument sign on a commercial parcel and a wall sign in a historic overlay can face very different limits even on the same street in Indiantown.
Use the figures below as a fast first check, then run a full address lookup to confirm the exact limits for a specific parcel in Indiantown, Florida. The full report also covers permit requirements, prohibited sign types, and illumination rules — each cited to the source ordinance so your permit application can reference it directly.
Before you order or install a sign in Indiantown, confirm three things: the maximum sign area and height allowed in the parcel’s zoning district, the minimum setback from the right-of-way, and whether the sign type you want — freestanding, monument, wall, projecting, or awning — is permitted there at all. Many permit denials come from missing a setback or an overlay-district restriction rather than from the size of the sign itself, so checking the governing section before applying saves a costly resubmittal.
Advertisement
Advertisement
Ground sign setback
Freestanding signs: at least 8 ft from any side property line and outside the visibility triangle; monument-style identification signs: at least 10 ft from the right-of-way property line.
Authority
Sign Chapter Scope
Source-backed sign ordinance/chapter scope: se LDRs. c. Nonconformity with parking and loading requirements. Full compliance with these LDRs shall be required where the seating capacity or other factors controlling the number of parking or loading spaces required is increased by ten percent or more. d. Nonconforming signs. Signs or sign structures made legally nonconforming under these LDRs shall be governed by Chapter 3. Sec. 1-13. Substandard single-family l
Sign Chapter Scope 2
Source-backed sign ordinance/chapter scope: erving the right of free speech and expression. The regulations within this chapter shall apply to all construction, relocation, enlargement, alteration and modification of signs within the Village of Indiantown. Generally, signs are approved by issuance of a sign permit. However, there are some signs that do not require a permit, these signs are listed in section 3-4.15(2). Noncommercial signs are allowed in all dis
Source-backed wall sign rules: 4.15 VILLAGE OF INDIANTOWN CDB:108 individual sign(s) shall not exceed one square foot of sign area for each linear foot of the retail department's interior façade or 75 percent of the size of the main building face sign, whichever is smaller. 2. Location. Signs shall be visible from the right-of-way on which the building fronts. When a building fronts on more than one right-of-way or parking lot on the rear or side
Building Signs
Building Sign Formula
1 sq ft per linear foot of façade/frontage for wall signage, with additional wall signs capped at 1 sq ft per linear foot of the building side or 60 sq ft, whichever is smaller.
Building Sign Max Number
1 wall sign per frontage, with an additional wall sign allowed at a public entrance on another right-of-way or parking-lot side.
Source-backed freestanding/ground/monument sign rules: that includes all letters, figures, graphics or other elements of the sign, together with the framework or back- ground of the sign. The support for the sign background, whether it be columns, a pylon, or a building or part thereof, shall not be included in a sign area. § 3-
Freestanding Ground Monument 2
Source-backed freestanding/ground/monument sign rules: gn without a frame, the sign area shall be the area within a regular geometric shape that includes all letters, figures, graphics or other elements of the sign. (c) For double-face or sandwich board signs, the area of the sign shall be calculated based on one sign face. (5) Permitted signs in commercial districts. For the purposes of this section, commercial districts shall mean a property in Downtown, Village Mixed-
Freestanding signs: at least 8 ft from any side property line and outside the visibility triangle; monument-style identification signs: at least 10 ft from the right-of-way property line.
Source-backed illumination rules: . Signs may be illuminated in compliance with the following: 1. Internally illuminated or backlit signs may only allow light to be visible through the letters and symbols which make up the sign. The background of the sign may not transmit light. 2. Externally illuminated signs may not cause glare to passing motorists, pedestrians or adjacent properties. Bulbs, lenses, or globes shall not be visible from outside of th
Advertisement
Advertisement
Maintenance
Maintenance
Source-backed maintenance rules: ll be maintained in working order and functioning in a safe manner. If the sign is a painted sign, the paint shall be kept in good condition. All signs will be kept in such manner as to constitute a complete sign at all times. The area immediately surrounding ground signs shall be kept clear of all unsightly vegetation or debris. (8) Liability insurance required. No permitted sign located on or projecting over a Vill
Permits
Permit Required 3
Source-backed sign permit requirement: completed application on a form provided by the Village; 2. The required fee; 3. A plan indicating the area and the proposed temporary uses; 4. A complete description of the activities which will occur and the time for which the permit is requested; and 5. A sign permit application and fee, if a banner is proposed. (c) The Director or designee may grant a temporary use permit upon finding that the applicant has compl
Permit Required 4
Source-backed sign permit requirement: s of the event and any proposed off-site facilities; 4. An estimate of the number of attendees; 5. The location of any amplified music and proposed sound levels; 6. The timeline for the event; 7. Any roadways or sidewalks that will need to be closed; and 8. A sign permit application and fee, if a banner is proposed. (c) Each application will be reviewed and approved or denied by the Director based on the following cr
Prohibited
Prohibited Signs 4
Source-backed prohibited signs: 1.3 B BEER. See: ALCOHOLIC BEVERAGES BICYCLES Infrastructure improvements and adequate public facilities Roadways, sidewalks and bike lanes ............................. 7-5 BILLBOARDS. See: SIGNS AND BILLBOARDS BOARDS, COMMISSIONS AND COMMITTEES Development review and procedures Platting and right-of-way Plat Committee ................................................ 12-7(7) BOATS, DOCKS AND WATERWAYS Zoning distric
Temporary
Temporary Signs
Source-backed temporary sign rules: ipment, fences, gates, walls, gasoline pumps, public tele- phones or utility cabinets which do not exceed a total of 0.75 square feet in area. (i) Single-family residential signs. Single-family residential properties are allowed one non- illuminated ground or wall sign, not to exceed six square feet in area or four (4) feet in height. (j) Temporary real estate signs. Where real property is being offered for sale, lea
Temporary Signs 2
Source-backed temporary sign rules: nts. When a building fronts on more than one right-of-way or parking lot on the rear or side of the building, an additional wall sign may be placed at the public entrance on that side. The square footage of additional signs shall not exceed one square foot of sign area for each linear foot of the building's side upon which the sign is placed or 60 square feet, whichever is smaller. (c) Multiple tenant developments. W
Source-backed wall sign rules: 4.15 APPENDIX B—LAND DEVELOPMENT REGULATIONS CDB:107 (b) For wall signs, canopy signs or any other type of sign without a frame, the sign area shall be the area within a regular geometric shape that includes all letters, figures, graphics or other elements of the sign. (c) For double-face or sandwich board signs, the area of the sign shall be calculated based on one sign face. (5) Permitted signs in commercial distri
Wall Signs 2
Source-backed wall sign rules: Mixed-Use, Light Industrial and Heavy Industrial zoning districts. (a) Freestanding signs. Each business, or group of businesses on a single parcel, fronting on a right-of-way is allowed a freestanding sign per right-of-way frontage. A corner lot may have two freestanding signs. 1. Square footage. The sign area shall be based on the width of the right-of-way frontage where the sign is located: a. A maximum sign squar
Source-backed window sign rules: plex or institutional use. Sign, wall: A sign mounted flat against and projecting less than 14 inches from, or painted on the wall of, a building or structure with the exposed face of the sign in a plane parallel to the face of the wall. This does not include window signs. Sign, window: A sign affixed to the interior or exterior of a window or placed immediately behind a window pane so as to attract the attention of
Need the full sign-code report?
The full interactive report includes all sign types, illumination rules, permit requirements, and source citations — for free.