Understanding sign regulations in Kenneth City, FL
Every outdoor sign in Kenneth City is governed by the municipality’s sign ordinance, which sets how large a sign may be, how tall it may stand, how far it must sit from the property line, whether it may be illuminated, and which sign types are permitted in each zoning district. This page summarizes those requirements in plain language and links each value back to the section of the Kenneth City code it came from.
Sign rules here are layered. The base zoning district — commercial, industrial, or residential — sets the default limits, and overlay districts such as historic or downtown districts can tighten them further. Because the most specific jurisdiction controls, a freestanding monument sign on a commercial parcel and a wall sign in a historic overlay can face very different limits even on the same street in Kenneth City.
Use the figures below as a fast first check, then run a full address lookup to confirm the exact limits for a specific parcel in Kenneth City, Florida. The full report also covers permit requirements, prohibited sign types, and illumination rules — each cited to the source ordinance so your permit application can reference it directly.
Before you order or install a sign in Kenneth City, confirm three things: the maximum sign area and height allowed in the parcel’s zoning district, the minimum setback from the right-of-way, and whether the sign type you want — freestanding, monument, wall, projecting, or awning — is permitted there at all. Many permit denials come from missing a setback or an overlay-district restriction rather than from the size of the sign itself, so checking the governing section before applying saves a costly resubmittal.
Advertisement
Advertisement
Authority
Sign Chapter Scope
Source-backed sign ordinance/chapter scope: ress of the sale. Such signs shall be removed each day at the close of the sale or by the end of daylight, whichever occurs first. (Code 1976, § 11-1; Ord. No. 2013-628, § 1, 4-10-13) --- Sec. 66-191. - Short title. --- This article shall be known as the town sign ordinance. (Ord. No. 389, § I(22-01), 2-14-90; Ord. No. 403, § 1, 7-11-90) --- Sec. 66-192. - Purpose and intent. --- It shall be the purpose and general i
Sign Chapter Scope 2
Source-backed sign ordinance/chapter scope: tside the limits of the sign and not forming an integral part of the display. Each face of a sign shall be included for the purpose of determining the surface area, and the entire area of internally lighted panels is to be used in the calculation of allowable sign area. The surface areas of signs painted directly on walls shall be calculated by constructing a square or rectangle around the outside of all elements of
Illumination
Illumination
Source-backed illumination rules: ports. Flag means a rectangular piece of fabric used as a symbol, signal or emblem. Frame means walls or structures designed to hold or highlight signs. Frontage means the length of any lot line or portion thereof bordering upon an officially recorded street. Illuminated sign means any sign which has characters, letters, figures, designs or outlines, illuminated directly or indirectly by electric lights or luminous t
Nonconforming
Nonconforming Signs
Source-backed nonconforming signs: s a canopy or covered structure projecting from and supported by a building. Multiple-family dwelling means a dwelling containing three or more separate dwelling units and designed for or occupied by three or more families living independently of one another. Nonconforming sign means every sign or advertising structure in existence at the adoption of the zoning ordinance which violates or does not conform to the prov
Nonconforming Signs 7
Source-backed nonconforming signs: cent of the replacement cost of the sign, the sign must be made to conform to these regulations. (3) A building or site which is improved or redeveloped at a cost in excess of 50 percent of the assessed value of the existing building or site shall require any nonconforming sign which is located on or is a part of such building or site to conform to these regulations. (b) Removal. The removal of nonconforming signs sh
Source-backed sign permit requirement: ees. --- (a) Permit requirements. No sign shall be erected, altered or relocated without a permit issued by the designated town official except as otherwise provided herein. Where electrical permits are required, they shall be obtained at the same time as the sign permit. Sign permits shall be obtained separately from building permits. (b) Applications. The permit application shall contain the location of the sign st
Permit Required 2
Source-backed sign permit requirement: wn official may require to ensure compliance with the ordinances of the town. (c) Fees. Fees for sign permits shall be paid in accordance with the following schedule: Permit fees: $30.00 plus $0.50 per linear foot. Electrical fee: $20.00. (d) Nullification. A sign permit shall become null and void if the work for which the permit was issued has not been completed within a period of six months after the date of the pe
Prohibited
Prohibited Signs 2
Source-backed prohibited signs: onary construction and not permanently attached to a building, the ground or other structures and which is intended to be displayed for a specific, limited period of time for a specific event, not including displays for holiday or other townwide celebrations. Temporary sign permits may be granted for a period not to exceed 30 days with one permit extension for a total of 60 days. Sign, trailer means any sign that is
Prohibited Signs 4
Source-backed prohibited signs: e adjacent residential areas or at angles that interfere with driver vision on adjacent roadways. (12) Signs which are located in a manner that would unreasonably obstruct or interfere with ingress, egress or the passage of light and air to any building. (13) Portable signs. (14) Parasite signs. (15) No sign or advertising device shall be erected, placed, project or overhang on any public right-of-way, sidewalk, stre
Temporary Signs
Temp Signs Allowed
allowed by permit; temporary sign permits may be granted, with a maximum period of 30 days and one extension for a total of 60 days
Need the full sign-code report?
The full interactive report includes all sign types, illumination rules, permit requirements, and source citations — for free.