Every outdoor sign in Largo is governed by the municipality’s sign ordinance, which sets how large a sign may be, how tall it may stand, how far it must sit from the property line, whether it may be illuminated, and which sign types are permitted in each zoning district. This page summarizes those requirements in plain language and links each value back to the section of the Largo code it came from.
Sign rules here are layered. The base zoning district — commercial, industrial, or residential — sets the default limits, and overlay districts such as historic or downtown districts can tighten them further. Because the most specific jurisdiction controls, a freestanding monument sign on a commercial parcel and a wall sign in a historic overlay can face very different limits even on the same street in Largo.
Use the figures below as a fast first check, then run a full address lookup to confirm the exact limits for a specific parcel in Largo, Florida. The full report also covers permit requirements, prohibited sign types, and illumination rules — each cited to the source ordinance so your permit application can reference it directly.
Before you order or install a sign in Largo, confirm three things: the maximum sign area and height allowed in the parcel’s zoning district, the minimum setback from the right-of-way, and whether the sign type you want — freestanding, monument, wall, projecting, or awning — is permitted there at all. Many permit denials come from missing a setback or an overlay-district restriction rather than from the size of the sign itself, so checking the governing section before applying saves a costly resubmittal.
Advertisement
Advertisement
Max ground sign height
12 ft max height
Awning Signs
Canopies Or Awnings Requirement
Approved street address number integrated into the fringe or leading edge of a canopy or awning shall be exempt from calculation as sign face area.
Building Signs
Light Projection Sign Maximum Area
Light projection signs: Light projection signs, which project light onto a building façade and include commercial content are allowed and must calculate the commercial content as part of the maximum wall sign area in accordance with Table 12-2.
Building Sign Max Number
No maximum stated for nonresidential wall signs; one per tenant space in multi-tenant buildings.
Regulated pursuant to the Development Outdoor Advertising/Billboard Agreements with various sign companies as adopted by City Commission.
Failure To Obtain A Permit Definition
Any work performed without a permit, when one is required, shall result in the entire sign being considered illegal and subject to immediate removal at the property owner's expense.
Conforming signs: Conforming abandoned signs must be removed within 90 days after written notification, or 180 days if face is replaced with blank or temporary covering
Damaged Sign Repair Days
Conforming signs: Damaged conforming signs must be repaired, replaced, or removed within 90 days
General Sign Permit Compliance
in full report
General Sign Permit Requirement
in full report
Sign Size Lot Building Relationship
in full report
Determining Length Of Building Frontage Maximum Area
Each parcel allowed no more than two temporary signs at any one time, each no more than 3 sq ft, unlimited display periods; exception: 90 days before through 7 days after any election in which city residents are eligible to vote, up to 5 signs per parcel allowed, each up to 10 sq ft
Window signs and coverings: Permanent and temporary window signs or coverings displaying commercial and non-commercial content shall be permitted on nonresidential land uses only.
Window Sign Allowable Area
Up to 25% of window area, or 100 sq ft total, whichever is less.
Need the full sign-code report?
The full interactive report includes all sign types, illumination rules, permit requirements, and source citations — for free.