F
FreeCodeChecks

Sign Code Summary

Port Orange, FL

Local sign ordinance requirements — free, cited to the source section.

Last updated

Run a full lookup for an address in Port Orange

Understanding sign regulations in Port Orange, FL

Every outdoor sign in Port Orange is governed by the municipality’s sign ordinance, which sets how large a sign may be, how tall it may stand, how far it must sit from the property line, whether it may be illuminated, and which sign types are permitted in each zoning district. This page summarizes those requirements in plain language and links each value back to the section of the Port Orange code it came from.

Sign rules here are layered. The base zoning district — commercial, industrial, or residential — sets the default limits, and overlay districts such as historic or downtown districts can tighten them further. Because the most specific jurisdiction controls, a freestanding monument sign on a commercial parcel and a wall sign in a historic overlay can face very different limits even on the same street in Port Orange.

Use the figures below as a fast first check, then run a full address lookup to confirm the exact limits for a specific parcel in Port Orange, Florida. The full report also covers permit requirements, prohibited sign types, and illumination rules — each cited to the source ordinance so your permit application can reference it directly.

Before you order or install a sign in Port Orange, confirm three things: the maximum sign area and height allowed in the parcel’s zoning district, the minimum setback from the right-of-way, and whether the sign type you want — freestanding, monument, wall, projecting, or awning — is permitted there at all. Many permit denials come from missing a setback or an overlay-district restriction rather than from the size of the sign itself, so checking the governing section before applying saves a costly resubmittal.

Census snapshot

Population
62,849
Median household income
$65,026
Median home value
$263,600
County
Volusia
Time zone
Eastern Time

Demographic figures are from the U.S. Census Bureau (American Community Survey) and are provided as jurisdiction context for Port Orange; they do not affect sign-code requirements.

Advertisement
Max ground sign height
Monument: 8 ft; Pylon: 25 ft
Ground sign setback
25 feet from a side lot line

Awning Signs

Awning Sign Sf Calc
40% of area of awning face
Awning Projection Clearance
8 ft. minimum clearance
Canopy Signs In Pedestrian Areas Requirement
in full report
Canopy Signs In Vehicular Areas Requirement
in full report

2 more awning signs rules in the full report →

Building Signs

Building Sign Formula
Signage area is determined based on the liner feet of the building frontage. Any sign area not used on the building frontage may be distributed onto the sides and/or rear of a building that is finished with a similar architectural facade treatment
Building Sign Max Number
1 per lot < 3 acres & 2 per lot ≥ 3 acres (Res and MF/I); 2 per lot with minimum 100 ft. distance between site signs (Comm)
Reconstructed Sign Building Height
in full report
Wall Sign Max Projection
in full report
Wall Sign Orientation
in full report
Wall Sign Requirement
in full report

4 more building signs rules in the full report →

Definitions

Yard Sign Definition
Yard sign: Yard signs are subject to the standards below.
Temporary Sign Types Definition
Temporary signs include the following types: (1) Banner.
Awning Sign Definition
in full report
Drive Thru Sign Definition
in full report
Permanent Sign Types Definition
in full report
Sandwich Board Sign Definition
in full report
Temporary Sign Cover Definition
in full report

5 more definitions rules in the full report →

Electrical Structural

Incidental Sign Requirement
Incidental sign: Incidental signs are subject to the standards below: Figure 15:21 Examples of incidental signs with four square feet or less of sign area Figure 15:22 Examples of incidental sign with greater than four square feet of sign area (a) Sign shall consist of a rigid background with a structural frame or similar frame.

General Info

Jurisdiction Name
Port Orange, FL

General Standards

Nonconforming Sign Damage Repair Limit
nonconforming signs: If a nonconforming sign is damaged by catastrophe to such an extent that the cost of repair and reconstruction will exceed 50 percent of the overall replacement cost of the sign at the time of damage, it shall not be repaired or reconstructed except in full conformity with the provisions of this code
Nonconforming Sign Repair Limit
nonconforming signs: Cost of repairs, maintenance, or improvements during any two-year period shall not exceed 25 percent of the overall replacement cost of the sign
Sign Maintenance Requirements
in full report
Sign Material Requirements
in full report
Window Sign Material Requirements
in full report
Severability Of Prohibition On Billboards Requirement
in full report

4 more general standards rules in the full report →

Advertisement

Ground Signs

Ground Sign Type
Monument; Pylon/pole
Ground Sign Formula
Monument: 60 sq ft on collector or arterial roadway; 32 sq ft on local street; 16 sq ft with 1 pole (RC district); 32 sq ft with 2 poles (RC district)
Ground Sign Max Height
in full report
Ground Sign Setback
in full report
Ground Sign Front Yard Placement
in full report
Ground Sign Post Dimensions
in full report
Monument Sign Location
in full report
Digital Sign Requirement
in full report

6 more ground signs rules in the full report →

Illumination

Measurement Distance Formula
Measurement distance = √ (Area of sign square feet × 100)
Sign Light Output Difference
The difference between the two measurements shall be 0.3 foot-candles or less
Sign Light Output Measurement
in full report

1 more illumination rule in the full report →

Permit Process

Sign Permit Required
A sign permit is required to change copy, erect, move, alter, reconstruct, or repair any permanent or temporary sign, except exempt signs
Subdivision Entry Sign Permit Requirement
Subdivision entry sign: These regulations apply to all subdivision entry signs: Figure 15:20 Examples of subdivision entry signs (a) A sign may be affixed to a wall that complies with the architectural requirements in chapter 14 of this code, provided the wall is expressly authorized by an approved subdivision plan, site plan, or building permit and is not located in a public right-of-way.

Prohibited Signs

Sign Obstructing Entrance
Any sign which obstructs free ingress to or egress from a door, window, fire escape or other required exit way

Temporary Signs

Temp Signs Allowed
Yes, permit required
Temp Sign Rules
Max area: varies; Max height: varies; Max duration: varies; Permit: required
Temporary Sign Permit Eligibility
in full report

1 more temporary signs rule in the full report →

Window Signs

Window Sign Allowable Area
6 sq ft max (Residential); 10% of total door and window area for a tenant (MF/I)

Need the full sign-code report?

The full interactive report includes all sign types, illumination rules, permit requirements, and source citations — for free.

See full report →