F
FreeCodeChecks

Sign Code Summary

Treasure Island, FL

Local sign ordinance requirements — free, cited to the source section.

Last updated

Run a full lookup for an address in Treasure Island →

Understanding sign regulations in Treasure Island, FL

Every outdoor sign in Treasure Island is governed by the municipality’s sign ordinance, which sets how large a sign may be, how tall it may stand, how far it must sit from the property line, whether it may be illuminated, and which sign types are permitted in each zoning district. This page summarizes those requirements in plain language and links each value back to the section of the Treasure Island code it came from.

Sign rules here are layered. The base zoning district — commercial, industrial, or residential — sets the default limits, and overlay districts such as historic or downtown districts can tighten them further. Because the most specific jurisdiction controls, a freestanding monument sign on a commercial parcel and a wall sign in a historic overlay can face very different limits even on the same street in Treasure Island.

Use the figures below as a fast first check, then run a full address lookup to confirm the exact limits for a specific parcel in Treasure Island, Florida. The full report also covers permit requirements, prohibited sign types, and illumination rules — each cited to the source ordinance so your permit application can reference it directly.

Before you order or install a sign in Treasure Island, confirm three things: the maximum sign area and height allowed in the parcel’s zoning district, the minimum setback from the right-of-way, and whether the sign type you want — freestanding, monument, wall, projecting, or awning — is permitted there at all. Many permit denials come from missing a setback or an overlay-district restriction rather than from the size of the sign itself, so checking the governing section before applying saves a costly resubmittal.

Advertisement
Max ground sign height
Monument: 5 ft; Pylon: Not specified
Ground sign setback
Side and rear setbacks: 20% of lot width/depth up to 20 feet when abutting residential property; no side or rear setback when abutting nonresidential property

Awning Signs

Awning Sign Sf Calc
Copy of awning, not whole awning

Building Signs

Building Sign Formula
One square foot for each linear foot of building frontage
Building Sign Illumination
Permit required
Attached Sign Area
in full report
Directory Sign Letter Height
in full report

2 more building signs rules in the full report →

Definitions

Abandoned Sign Definition
signs on which is associated with a business that is no longer licensed, no longer has a certificate of occupancy or is no longer doing business at that location and such circumstances have continued for a period of more than 90 consecutive days.
Area Or Surface Area Of Signs Definition
the square foot area enclosed by a rectangle, parallelogram, triangle, circle, semi-circle, other geometric figures or other architectural design, the sides of which make contact with the extreme points or edges of the sign, excluding the supporting structure which does not form part of the sign proper or of the display.
Double Faced Sign Definition
in full report
Freestanding Sign Definition
in full report
Illuminated Sign Definition
in full report
Integral Roof Sign Definition
in full report
Marquee Sign Definition
in full report
Multi Prism Sign Definition
in full report
Offsite Sign Definition
in full report
Onsite Sign Definition
in full report
Pennant Definition
in full report
Portable Signs Definition
in full report
Projecting Sign Definition
in full report
Roof Sign Definition
in full report
Sign Face Definition
in full report
Subdivision Sign Definition
in full report
Temporary Sign Definition
in full report
Twirling Sign Definition
in full report
Vehicle Or Trailer Signs Definition
in full report
Vintage Sign Definition
in full report
Wall Signs Definition
in full report
Window Sign Definition
in full report
Banner Definition
in full report
Electronic Reader Board Definition
in full report
Ground Level Definition
in full report
Illegal Sign Definition
in full report
Illegal Sign Definition
in full report
Machinery Sign Definition
in full report
Nonconforming Sign Definition
in full report

27 more definitions rules in the full report →

Directional Signs

Directional Max Size
3 square feet in sign area per face
Signage In The Public Right Of Way Allowance
Should the city choose to install wayfinding signs, those may be placed in the public right-of-way.

General Info

Jurisdiction Name
Treasure Island, FL

General Standards

Nonconforming Signs Definition
Existing signs installed in violation of any city, state, or federal law, statute or ordinance shall not qualify as nonconforming signs
Additional Sign Prohibition Review Requirement
No private signage is permitted on public property without prior approval of the city commission.
Gasoline Price Display Sign Maximum Area
in full report
Severability Of Prohibition On Offsite Sign Requirement
in full report

2 more general standards rules in the full report →

Advertisement

Ground Signs

Ground Sign Type
Monument and pylon/pole
Ground Sign Formula
Monument: One square foot in RFM-30, RFH-50, PR-MU Code, and PR-MU Gulf Blvd zoning districts for each linear foot of zone lot frontage; Pylon: One-half square foot in CG zoning districts for each linear foot of zone lot frontage
Ground Sign Max Height
in full report
Double Faced Sign Area
in full report
Freestanding Sign Area
in full report
Ground Sign Max Height
in full report
Ground Sign Setback
in full report

5 more ground signs rules in the full report →

Illumination

Illuminated Sign Permit Required
Any sign having illumination must obtain a permit

Permit Process

Permit Time Frame
30 days
Construction Site Sign Permit Requirement
zones RM-15, RU-75: For a property with an active valid building permit, the property may have a free-standing sign that does not exceed 32 square feet in area per sign face, except those in the RM-15 zoning district shall not exceed 15 square feet in area per sign face and RU-75 zoning district, shall not exceed six square feet in area per sign face.
Exempt Sign Permit Requirement
in full report
Triangulation Requirements
in full report

2 more permit process rules in the full report →

Prohibited Signs

Prohibited Sign On Public Property
No private signage is permitted on public property without prior approval of the city commission
Prohibited Sign Locations Public Property
Signs shall not be located on publicly owned land or easements or inside street rights-of-way except signs required or erected by permission of the city manager
Prohibited Sign Projecting Into Airspace
in full report
Prohibited Signs On Trees
in full report

2 more prohibited signs rules in the full report →

Temporary Signs

Temp Signs Allowed
Permit required
Temp Sign Rules
Max area: 12 sq ft; Max height: 5 ft; Max duration: Not specified; Permit: Required
Temporary Sign Maximum Area
in full report

1 more temporary signs rule in the full report →

Need the full sign-code report?

The full interactive report includes all sign types, illumination rules, permit requirements, and source citations — for free.

See full report →