Every outdoor sign in Valparaiso is governed by the municipality’s sign ordinance, which sets how large a sign may be, how tall it may stand, how far it must sit from the property line, whether it may be illuminated, and which sign types are permitted in each zoning district. This page summarizes those requirements in plain language and links each value back to the section of the Valparaiso code it came from.
Sign rules here are layered. The base zoning district — commercial, industrial, or residential — sets the default limits, and overlay districts such as historic or downtown districts can tighten them further. Because the most specific jurisdiction controls, a freestanding monument sign on a commercial parcel and a wall sign in a historic overlay can face very different limits even on the same street in Valparaiso.
Use the figures below as a fast first check, then run a full address lookup to confirm the exact limits for a specific parcel in Valparaiso, Florida. The full report also covers permit requirements, prohibited sign types, and illumination rules — each cited to the source ordinance so your permit application can reference it directly.
Before you order or install a sign in Valparaiso, confirm three things: the maximum sign area and height allowed in the parcel’s zoning district, the minimum setback from the right-of-way, and whether the sign type you want — freestanding, monument, wall, projecting, or awning — is permitted there at all. Many permit denials come from missing a setback or an overlay-district restriction rather than from the size of the sign itself, so checking the governing section before applying saves a costly resubmittal.
Advertisement
Advertisement
Building Signs
Building Sign Formula
not exceed a total area of two square feet of sign area for each linear foot of building wall upon which the sign is placed
Building Sign Max Number
One wall sign is permitted with any other type of sign
An abandoned sign is a sign which no longer advertises or gives correct directions to a bona fide business conducted, a service performed or a product sold, or which is not being maintained, as determined by the city building inspector.
Awning Signs Definition
An awning sign is a sign painted on, printed on or attached flat against the surface of an awning.
All sandwich signs must be adequately anchored to withstand 60 mile-per-hour wind gusts
General Standards
Nonconforming Sign Continuation
Nonconforming signs may be continued in use after the effective date of the ordinance, provided they do not constitute a hazard to public safety or adjoining properties and comply with all applicable ordinances
Nonconforming Sign Conformity Deadline
signs that violated the then existing ordinance at the time of installation: Nonconforming signs must be brought into conformance within 60 days from the passage of the ordinance if they violated the then existing ordinance at the time of installation
Largest face counts; cabinet/module totals define area.
Ground Sign Type
Freestanding (ground) sign
Permit Process
Sign Permit Required
No person shall relocate, install, construct onsite or alter onsite an outdoor sign without first obtaining a permit
Sign Permit Application Requirements
Application shall include drawings, specifications, number of signs, design, stress, location, construction, materials, illumination method, securing method, and wording
Off-premises signs are prohibited, except for off-premises directional signs advertising a business within the city
Sandwich Sign Placement Restrictions
Sandwich signs will not be allowed on street rights-of-way. Additionally, sandwich signs must not be placed in Clear Visibility Triangles described in section 130-4(c)
Temporary Signs
Temp Sign Rules
Placed at maximum distance from center line of road, within outside edge of right-of-way
Temporary Sign Placement Distance
political signs: Placed at maximum distance from center line of road, within outside edge of right-of-way