Every outdoor sign in Williston is governed by the municipality’s sign ordinance, which sets how large a sign may be, how tall it may stand, how far it must sit from the property line, whether it may be illuminated, and which sign types are permitted in each zoning district. This page summarizes those requirements in plain language and links each value back to the section of the Williston code it came from.
Sign rules here are layered. The base zoning district — commercial, industrial, or residential — sets the default limits, and overlay districts such as historic or downtown districts can tighten them further. Because the most specific jurisdiction controls, a freestanding monument sign on a commercial parcel and a wall sign in a historic overlay can face very different limits even on the same street in Williston.
Use the figures below as a fast first check, then run a full address lookup to confirm the exact limits for a specific parcel in Williston, Florida. The full report also covers permit requirements, prohibited sign types, and illumination rules — each cited to the source ordinance so your permit application can reference it directly.
Before you order or install a sign in Williston, confirm three things: the maximum sign area and height allowed in the parcel’s zoning district, the minimum setback from the right-of-way, and whether the sign type you want — freestanding, monument, wall, projecting, or awning — is permitted there at all. Many permit denials come from missing a setback or an overlay-district restriction rather than from the size of the sign itself, so checking the governing section before applying saves a costly resubmittal.
Census snapshot
Population
2,980
Median household income
$58,028
Median home value
$194,100
County
Levy
Time zone
Eastern Time
Demographic figures are from the U.S. Census Bureau (American Community Survey) and are provided as jurisdiction context for Williston; they do not affect sign-code requirements.
Advertisement
Advertisement
Building Signs
Building Sign Formula
Sign Area To Front Elevation Ratio: C-1, CBD, C-2: 0.20; I: 0.25; A: 0.10
Definitions
Pennant Definition
any flag-like piece of cloth, plastic or paper, temporarily attached to any staff, cord, building or other structure that hangs loosely for the purpose of attracting attention to its site.
Projecting Sign Definition
a sign supported by a wall of a building, projecting away from that wall 12 inches or more, designed with a face or faces reading at a 90-degree, or less, angle (internal) to that wall.
Real Estate Sign Definition
in full report
Temporary Sign Definition
in full report
Wall Sign Definition
in full report
Window Sign Definition
in full report
Definition Abandoned Sign
in full report
Definition Anchor
in full report
Abandoned Sign Definition
in full report
All Signs That Have No Permanent Attachment To A Building Or To The Ground By Definition
Obsolete or abandoned signs shall be removed by the owner within 30 days after written notification from the land development regulations administrator and/or code enforcement officer.
Permanent Sign Materials
No permanent signs shall be constructed with materials such as canvass, cloth, cardboard, vinyl or similar materials
Sign Maintenance Requirements
in full report
Sign Removal Requirements
in full report
Sign Removal Requirements
in full report
Nameplates And Identification Sign Requirement
in full report
Properties With Multiple Street Frontage Requirement
Erection of signs: The erection or painting of all signs requiring permits under this chapter shall be done by and permitted to a commercial contractor or sign contractor licensed with the city, except that property owners or their lessees may erect or paint non-illuminated signs of up to 32 square feet attached to an approved existing structure or building.
No Sign Permit Exemption
No signs: No signs, except those listed in section 52-5 or section 52-13, that do not require a permit, may be erected, hung, placed, or structurally altered without a permit from the building inspector.
16 sq ft per sign; 32 sq ft combined internally per business
Zoning
On Site Sign Requirement
on-site signs: Unless otherwise specifically permitted or exempted by this Code, and in accordance with all applicable sections of this Code, on-site signs shall conform to the design specifications shown on Tables 11-1 through 11-3.
Signs In Commercial And Manufacturing Districts Allowance
Signs in commercial and manufacturing districts: Business and advertising signs are permitted in commercial and manufacturing districts in accordance with these land development regulations.
Need the full sign-code report?
The full interactive report includes all sign types, illumination rules, permit requirements, and source citations — for free.