Every outdoor sign in Danville is governed by the municipality’s sign ordinance, which sets how large a sign may be, how tall it may stand, how far it must sit from the property line, whether it may be illuminated, and which sign types are permitted in each zoning district. This page summarizes those requirements in plain language and links each value back to the section of the Danville code it came from.
Sign rules here are layered. The base zoning district — commercial, industrial, or residential — sets the default limits, and overlay districts such as historic or downtown districts can tighten them further. Because the most specific jurisdiction controls, a freestanding monument sign on a commercial parcel and a wall sign in a historic overlay can face very different limits even on the same street in Danville.
Use the figures below as a fast first check, then run a full address lookup to confirm the exact limits for a specific parcel in Danville, Illinois. The full report also covers permit requirements, prohibited sign types, and illumination rules — each cited to the source ordinance so your permit application can reference it directly.
Before you order or install a sign in Danville, confirm three things: the maximum sign area and height allowed in the parcel’s zoning district, the minimum setback from the right-of-way, and whether the sign type you want — freestanding, monument, wall, projecting, or awning — is permitted there at all. Many permit denials come from missing a setback or an overlay-district restriction rather than from the size of the sign itself, so checking the governing section before applying saves a costly resubmittal.
Advertisement
Advertisement
Max ground sign height
20 ft.
Authority
Sign Chapter Scope
Source-backed sign ordinance/chapter scope: 0.114 NONCONFORMING SIGNS. (A) Signs that do not conform to the provisions of this subchapter are nonconforming structures and are subject to regulation as a nonconformity under §§ 150.150 through 150.155 of this chapter. (B) A nonconforming sign or sign structure may be continued under the provisions of §§ 150.150 through 150.155, but the sign shall be brought into conformity with this subchapter when it is altered,
Sign Chapter Scope 2
Source-backed sign ordinance/chapter scope: 50.153 of this chapter. (C) No sign that is nonconforming solely because it violates a spacing requirement between signs shall be required to eliminate that nonconformity if compliance with the spacing regulation on the lot is not physically possible. (D) All nonconforming signs shall be brought into conformity with this subchapter or eliminated at the owner’s expense within the following time periods: (1) Five years
Awning Signs
Awning Projection Clearance
Must clear sidewalks by at least 8 ft and may extend to within 2 ft of the vertical plane formed by the curb or right-of-way line.
Building Signs
Building Sign Formula
10% of wall area per frontage in the B-1/B-2/B-3/B-4 business districts.
Ground Signs
Ground Sign Type
Monument and pole.
Ground Sign Formula
B-2 business district: 40 sq ft, or 80 sq ft when the sign is a monument style.
Source-backed sign permit requirement: he owner’s expense within the following time periods: (1) Five years from the official notification of the nonconforming status by the Zoning Administrator, however, no sign controlled by this subchapter need be removed sooner than ten years from the date the sign permit authorizing the erection of the sign was issued. (2) Nonconforming temporary signs shall be removed within ten days of the official notification of
Permit Required 2
Source-backed sign permit requirement: fficial notification of the nonconforming status by the Zoning Administrator, however, no sign controlled by this subchapter need be removed sooner than ten years from the date the sign permit authorizing the erection of the sign was issued. (2) Nonconforming temporary signs shall be removed within ten days of the official notification of the nonconforming status by the Zoning Administrator. (Ord. 8612, passed 12-2-0
Advertisement
Advertisement
Prohibited
Prohibited Signs
Source-backed prohibited signs: t B-4 40 square feet 12 feet Monument P-1 24 square feet 12 feet Monument I-1 25 square feet or 50 square feet when sign is a monument style 16 feet Pole or Monument I-2 40 square feet or 80 square feet when sign is a monument style TABLE VII-2. STANDARDS FOR WALL SIGNS Districts Permitted Maximum Area of Signs Per Frontage Districts Permitted Maximum Area of Signs Per Frontage B-1 10% of wall area B-2 10% of wall ar
Prohibited Signs 2
Source-backed prohibited signs: imum Area of Signs Per Frontage Districts Permitted Maximum Area of Signs Per Frontage B-1 10% of wall area B-2 10% of wall area B-3 10% of wall area B-4 10% of wall area P-1 5% of wall area I-1 10% of wall area I-2 10% of wall area TABLE VII-3. STANDARDS FOR PROJECTING SIGNS Districts Permitted Maximum Area of Sign Minimum Height Maximum Height B-1 32 square feet Projecting signs must clear sidewalks by at least eig
Source-backed abandoned/removal rules: al design of the development or a densely planted hedge shall be provided along any side or rear yard abutting a residentially zoned district. (I) Signage. Signs for commercial uses in a Residential PUD with underlying residential zoning shall comply with the sign regulations for the B-1 Zoning District. All other signs and sign structures must comply with the regulations for the underlying zoning district. (J) Sewer
Temporary
Temporary Signs
Source-backed temporary sign rules: inate to the principal use of the premises, and which does not change the basic character thereof as determined by its principal use. "ADJACENT." Lying close to or near, including across an alley or street. "ADMINISTRATIVE REGULATION." Written orders or i --- SIGN CODE FOCUSED SLICE --- (1) A-frame, Tee-Pee or similarly constructed signs. A maximum of one A-frame, Tee-Pee, or similarly constructed sign is permitted p
Temporary Signs 2
Source-backed temporary sign rules: similarly constructed signs. A maximum of one A-frame, Tee-Pee, or similarly constructed sign is permitted per business per lot. Such sign shall only be displayed during the normal hours of operation of the subject business. (2) Grand Opening/Closing Signs. A temporary sign announcing a business grand opening event or store closing event, or seeking employees. Such sign shall be displayed for no more than 30 consecut
Yes; permit requirement is not specified in the provided facts.
Temp Sign Rules
A-frame/Tee-Pee: 1 per business per lot, only during normal hours; grand opening/closing: up to 30 consecutive days; real estate: 1 per street frontage, remove within 7 days after closing/lease; construction: 1 per street frontage, remove within 7 days after completion; garage sale: max 5 sq ft, post no more than 2 days before and remove within 2 days after, 6-day total display; community event: up to 30 days before and remove within 7 days after the event; permit not specified.
Wall Signs
Wall Signs
Source-backed wall sign rules: 0.115 SIGN AREA AND BULK STANDARDS. TABLE VII-1. STANDARDS FOR FREESTANDING SIGNS Districts Permitted Maximum Area of Sign Maximum Height of Sign Style of Sign Districts Permitted Maximum Area of Sign Maximum Height of Sign Style of Sign B-1 32 square feet 12 feet Monument B-2 40 square feet or 80 square feet when sign is a monument style 20 feet Pole or Monument B-3 40 square feet or 80 square feet when sign is a mo
Need the full sign-code report?
The full interactive report includes all sign types, illumination rules, permit requirements, and source citations — for free.