F
FreeCodeChecks

Sign Code Summary

Davis Junction, IL

Local sign ordinance requirements — free, cited to the source section.

Last updated

Run a full lookup for an address in Davis Junction

Understanding sign regulations in Davis Junction, IL

Every outdoor sign in Davis Junction is governed by the municipality’s sign ordinance, which sets how large a sign may be, how tall it may stand, how far it must sit from the property line, whether it may be illuminated, and which sign types are permitted in each zoning district. This page summarizes those requirements in plain language and links each value back to the section of the Davis Junction code it came from.

Sign rules here are layered. The base zoning district — commercial, industrial, or residential — sets the default limits, and overlay districts such as historic or downtown districts can tighten them further. Because the most specific jurisdiction controls, a freestanding monument sign on a commercial parcel and a wall sign in a historic overlay can face very different limits even on the same street in Davis Junction.

Use the figures below as a fast first check, then run a full address lookup to confirm the exact limits for a specific parcel in Davis Junction, Illinois. The full report also covers permit requirements, prohibited sign types, and illumination rules — each cited to the source ordinance so your permit application can reference it directly.

Before you order or install a sign in Davis Junction, confirm three things: the maximum sign area and height allowed in the parcel’s zoning district, the minimum setback from the right-of-way, and whether the sign type you want — freestanding, monument, wall, projecting, or awning — is permitted there at all. Many permit denials come from missing a setback or an overlay-district restriction rather than from the size of the sign itself, so checking the governing section before applying saves a costly resubmittal.

Advertisement
Max ground sign height
Monument: 5 ft; Pylon: 25 ft
Ground sign setback
10 feet from all property lines

Building Signs

Building Sign Formula
Aggregate (total) sign area of 0.5 sf. per linear ft. of façade width (zoning district 1); 1 sf. per linear ft. of façade width (zoning district 4)
Building Sign Max Number
1 sign per façade (Residential and Agriculture Districts)
Building Sign Illumination
in full report

1 more building signs rule in the full report →

Definitions

Other Signs Definition
The area of the face of the sign which is designed to be used for text and graphics (the signable area does not include the sign's supporting frame or structure, if any, provided that such frame or structure is not designed to display text or graphics).
Multi Tenant Electronic Message Centers Definition
Multi-Tenant Electronic Message Centers: Multi-tenant electronic message centers are intended to provide an opportunity for unified, multi-tenant developments to advertise on-site businesses through uniform sign designs subject to the requirements set forth in this subsection 3.
Sign Clearance Definition
in full report
Signable Area Ratio Definition
in full report
Wall Sign Definition
in full report
Window Sign Definition
in full report

4 more definitions rules in the full report →

General Info

Jurisdiction Name
Davis Junction, IL

General Standards

Address Signs Excluded From Area
Address numbers and letters not more than 14 inches in height are excluded from sign area calculation
Regulation Hierarchy
Where provisions of Part I-C cover the same subject matter as other regulations, the more restrictive regulation shall apply
Exclusion From Sign Area Calculation Requirement
in full report

1 more general standards rule in the full report →

Ground Signs

Ground Sign Type
Monument (small, ~6-8 ft) and pylon/pole (larger)
Ground Sign Formula
Maximum sign area: 32 sq ft (Residential Districts); Maximum sign area per sign/total (Nonresidential/Mixed-Use Districts)
Ground Sign Max Height
in full report
Ground Sign Setback
in full report

2 more ground signs rules in the full report →

Advertisement

Illumination

Emc Dimming Capabilities
All electronic message centers shall be equipped with a sensor or other device that automatically determines the ambient illumination and programmed to automatically dim according to ambient light conditions
Emc Illumination Precedence
If there is a difference in illumination levels on either side of the sign, the side facing residentially zoned properties shall take precedence
Electronic Message Center Illumination Limits Requirement
in full report

1 more illumination rule in the full report →

Permit Process

Triangulation Requirements
Sign will not be located within the sight triangle
Sign Permit Exemption
Signs not requiring a permit include: (1) signs ≤1 sq ft affixed to buildings/structures with only one per elevation visible from public rights-of-way or neighboring property; (2) signs <0.75 sq ft affixed to machines, equipment, fences, gates, walls, gasoline pumps, public telephones, or utility cabinets
Sign Permit Required
in full report
Sign Permit Required On Increase
in full report
Sock Signs And Temporary Wall Sign Permit Requirement
in full report

3 more permit process rules in the full report →

Prohibited Signs

Prohibited Content Classification
The narrow classifications of content that are prohibited by this subsection are either not protected by the United States or Illinois Constitutions, or are offered limited protection that is outweighed by the substantial governmental interests in protecting the public safety and welfare

Temporary Signs

Temp Signs Allowed
Yes, permit required for signs exceeding 6 sq ft
Temp Sign Rules
Max area: not specified; max height: not specified; max duration: 90 days per year; permit: required for signs exceeding 6 sq ft
Temporary Sign Removal Criteria
in full report
Temporary Sign Removal Criteria
in full report

2 more temporary signs rules in the full report →

Need the full sign-code report?

The full interactive report includes all sign types, illumination rules, permit requirements, and source citations — for free.

See full report →