Every outdoor sign in Savoy is governed by the municipality’s sign ordinance, which sets how large a sign may be, how tall it may stand, how far it must sit from the property line, whether it may be illuminated, and which sign types are permitted in each zoning district. This page summarizes those requirements in plain language and links each value back to the section of the Savoy code it came from.
Sign rules here are layered. The base zoning district — commercial, industrial, or residential — sets the default limits, and overlay districts such as historic or downtown districts can tighten them further. Because the most specific jurisdiction controls, a freestanding monument sign on a commercial parcel and a wall sign in a historic overlay can face very different limits even on the same street in Savoy.
Use the figures below as a fast first check, then run a full address lookup to confirm the exact limits for a specific parcel in Savoy, Illinois. The full report also covers permit requirements, prohibited sign types, and illumination rules — each cited to the source ordinance so your permit application can reference it directly.
Before you order or install a sign in Savoy, confirm three things: the maximum sign area and height allowed in the parcel’s zoning district, the minimum setback from the right-of-way, and whether the sign type you want — freestanding, monument, wall, projecting, or awning — is permitted there at all. Many permit denials come from missing a setback or an overlay-district restriction rather than from the size of the sign itself, so checking the governing section before applying saves a costly resubmittal.
Advertisement
Advertisement
Max ground sign height
10 feet (single-tenant); 15 feet (multi-tenant)
Ground sign setback
minimum five feet from all property lines, rights-of-way, and utility easements
Awning Signs
Awning Sign Sf Calc
Whole awning/canopy face
Building Signs
Building Sign Max Number
Single tenant: 2 primary wall signs, 1 per façade; Multi-tenant: 1 primary wall sign per unit
Building Sign Formula
C-2/DT/residential: 10% of wall face; other districts: 20%
electronic message boards: Digital display shall have a minimum resolution of twenty (20) mm
Emc Message Change Frequency
electronic message boards: Message shall not change more frequently than once every ten (10) seconds
Permit Process
Triangulation Requirements
Freestanding signs shall not be located in a clear sight triangle; sign placement governed by sight triangle standards in Section 16.04.009 to prevent interference with traffic signals and visibility.
Temporary Signs
Temp Sign Rules
Temporary sign area limit: 1 square foot per linear foot of lot frontage (aggregate). Concurrent display: max 2 permitted temporary signs for single-tenant buildings, max 1 per unit for multi-tenant buildings (max 2 freestanding concurrently). Display period: max 30 consecutive days per permit period; max 2 nonconsecutive display periods per calendar year. Ground-mounted temporary signs: max 25 sq ft area, 8 ft height, 6 months per calendar year with monthly fee. Wall-mounted banner signs: max 5% of wall face area. Temporary window signs: max 25% of window area.
Temp Signs Allowed
Allowed; some types require a permit
Window Signs
Window Sign Allowable Area
25% of the individual window area
Need the full sign-code report?
The full interactive report includes all sign types, illumination rules, permit requirements, and source citations — for free.